MULTIPOINT CIRCULAR-CHART RECORDER INSTALLATION AND OPERATION MANUAL
Section 2
Page 2 - 9
HA250385
Issue 2 Mar 98
Type Absolute High
Threshold 0.00
Threshold 780.00
Threshold 780.00
Alarm : Setpoint
Alarm : Job 1
No Action
Chart Online
Chart span B Ch 1
Chart Span B for All
Disable all alarms
Ack all alarms
Send log 1 to chart
On going active
On going active
Alarm : Job 1
Channel : Alarm 1
Channel : Trace
2.5.3 CHANNEL CONFIGURATION (Cont.)
Alarm Threshold (Setpoint)
Operate the Page up key to call the Threshold page.
Use the up arrow and cursor keys to set the threshold
to 780.00, using the technique described for input
range (section 2.5.3 above).
In this case the decimal point is in the right place
and does not need to be entered.
Operate the Enter key to confirm the setting, then the
Cancel key to return to the Alarm : Setpoint page.
Alarm JobS
Use the Page up key to call the Alarm Job 1 page,
and operate the Enter key.
Use the up arrow key repeatedly to scroll through
the available jobs, until 'Send log 1 to chart' ap-
pears, then operate the page key.
Initially, log 1 contains input channels 1 to 6. The
contents can be changed in log configuration as de-
scribed in section 4.6.1.
Page to the actions choice. The 'On going Active'
action is as required, and our alarm configuration is
now complete,
Operate the Enter key to enter the changes made so
far, then operate the Cancel key twice to return to the
Channel : Alarm 1 page.
Use the Page up key to call the Channel : Trace page
'E'
'E'
'E'
'E'
'E'
'E'
'E'
'E'