EUROTECNO S.R.L Maior Omnia, Manual Of Instructions, Use And Maintenance, Page: 9 / 50

1
– STANDARDS AND GENERAL WARNINGS
EN
THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L.
– REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
1 - 3
1.2. METHOD FOR CONSULTING THE MANUAL
1.2.1 Structure of the manual
The manual is divided in chapters, containing all the relevant information for a risk-free utilisation of the
machine.
Each chapter has a sub-division to focus on essential points; the paragraphs may contain further
clarifications with a subtitle and a description.
Every chapter begins with an indication on the right side of the page, which contains the chapter number and
the heading.
Chapters (e.g. chapter 1) are structured as follows:
1
Chapter heading
1.1 Paragraph heading
1.1.1 Subtitle heading
1.1.1.1 Any further subtitle heading
The numbering of pages, images and tables resets at the beginning of each new chapter. As a
consequence, you will find a prefix indicating the chapter and the number of page, image or table that starts
again at number 1 at the beginning of every chapter.
1.2.2 Description of the pictograms
The manual uses the following symbols to highlight important information and warnings:
WARNING :
This symbol indicates accident prevention rules for the operator and/or any other exposed
person.
CAUTION :
This symbol draws the attention to the risk of damaging the machine and/or its components.
NOTE :
This symbol provides useful information.