EN
3 - INSTALLATION
THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L.
– REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
3 - 14
3.5.3
Screen installation
Number of
operators
For the screen installation are needed two installers.
Preliminary
operations
To carry out the screen installation, the Maior Omnia® must be correctly fastened
to the ceiling / correctly positioned on the floor.
Steps
Tasks
1
Verify the compatibility between the position of the holes on the television back and the holes
of the VESA TV bracket.
2
Prepare the adequate screws to fasten the TV, making sure that the length of the screws is
appropriate in order to install your device.
3
Get the television close to the Maior Omnia®, in front of the
TV fastening bracket
unit
,
identifying the coinciding holes.
NOTE
:
Do not force excessively while tightening the screws, as this could damage your TV.
4
Verify that the television height and level is correct. If not so, it is possible to adjust its position
while loosening the screws that anchor it to the
TV fastening bracket
unit
.
WARNING
:
Pay full attention during this operation, as the screen is completely free.
5
Check the correct functioning of the Maior Omnia®.
Table 3 - 4