Eurotech PXA320, User Manual, Page: 32 / 62

Graphics ClientM User Manual
110120-1000A
32
J5: Touch Panel
Board connector: 4-pin header with friction lock, 0.1-inch, Molex 22-23-2041
Mating connector: Molex 22-01-3047
Header J5 supplies the signals for a 4- or 5-wire touch panel. A standard GCM supports
a 4-wire touch panel. For further details, see Touch Panel , page 20 .
Pin Name Type 4-Wire 5-Wire Description
1 TSMX AIO left LL
Touch panel
2 TSPX AIO right UL
3 TSPY AIO bottom UR
4 TSMY AIO top LR
5 WIPER AI wiper
J6: LCD
Board connector: 2x17 shrouded header, 0.1-inch, OUPIIN 3012-34G-00S
Mating connector: OUPIIN 1001-34G00B1
Header J6 supplies the power, control, and data signals required to drive a LCD. The
following table describes the signals included on the header. Signal names shown are
for TFT active matrix color LCDs at 16 bits per pixel (bpp). For further details, see
Display , page 19 .
Pin PXA320
Signal Name
Color Active TFT Display at 16 bpp
Eurotech
Signal Name
Description
1 PNL_VEE VEE power output
2 GND ground
3 LPCLK PNL_PIXCLK Pixel clock
4 LLCLK PNL_HSYNC Horizontal sync
5 LFCLK PNL_VSYNC Vertical sync
6 GND ground
7 LDD15 PNL_RED0
Red data
8 LDD11 PNL_RED1
9 LDD12 PNL_RED2
10 LDD13 PNL_RED3
11 LDD14 PNL_RED4
12 LDD15 PNL_RED5
13 GND ground