Eurotech DynaGate 10-12 Series, User Manual

Page: 57 / 94

DynaGATE 10-12 User manual Rev. 0-14 9 How to supply power to the product
9 H
OW TO SUPPLY POWER TO THE PRODUCT
NOTICE
This product is not provided with any ON/OFF switch.
The Power IN connector is the disconnecting means from the power supply network.
9.1 Power supply specifications
Power supply Nominal: 12 or 24 VDC; Range: 9 to 36 VDC with transient protection and Vehicle Ignition Sense
Power consumption 2 W typical; 15 W maximum
Peak demand < 15 W
9.1.1 Power IN connector and mating connector specifications
The power input is protected against: surge, noise, reverse polarity, over-voltage.
NOTICE
The Power IN connector is NOT protected against short circuit.
Always include an external fuse to protect the product!
The DynaGATE 10-12 provides the Power IN connector on the rear panel.
Connector Layout:
1 3
Connector Specifications:
l
Base strip, Header
l
Gender: Male
l
Type: 3-pin, 3.5 mm pitch
Mating Connector Specifications:
l
Pluggable screw terminal block
l
Gender: Female
l
Type: 3-pin, 3.5 mm pitch
l
Example:
Manufacturer: Phoenix Contact
Part Number: MC 1,5/ 3-STF-3,5 - 1847068
(or equivalent)
Connector Pinout:
Pin # Signal Type Description
1 Power IN + P Positive power supply input
2 Power IN - P Negative power supply input
3 KEY P Vehicle Ignition Sense
57 / 94