EuroTech Communication GSM gateway User Manual Download Page 2

Page: 2 / 42

MasterVoIP

VoIP to GSM Gateway

Usage Warnings

1) High voltage transients, surges, and other power irregularities can cause

extensive damage.

It is the user's responsibility to provide a power protection system.

2) It is the user's responsibility to install, operate, and maintain the system in

accordance with all

applicable codes, regulations, and safety measures.

Trademark and Patents

All trademarks, patents and copyrights apply

General Manual Notes

Without notice and without obligation, the contents of this manual may be revised to

incorporate

changes and improvements.

Every effort, has been made to ensure that the information in this manual is most

complete and

accurate while writing this time of publication.

Nevertheless, Mega 2000 AS cannot be held responsible for errors or commissions.

Summary of Contents for GSM gateway











































Search results

Summary of Contents for GSM gateway

Reviews:

Related manuals for GSM gateway

Brands by name

Popular brands

EuroTech Communication GSM gateway, User Manual

Search results

Summary of Contents for GSM gateway

Reviews:

Related manuals for GSM gateway

Brands by name

Popular brands