Eurosystems MSP 02, User Manual

Page: 18 / 40

e
n
3. DEFINITION OF PICTOGRAMS
DANGER!
Keep all labels clean and in good condi-
tion, replace them if damaged.
Accelerator command. In the START
position, the air is open; while, in the
STOP position, the motor is off.
3.
1. 2. 4.
1. Read the instructions manual before
operating on the machine.
2. Danger, hurling objects! Keep other
people well away from the danger area!
3. Warning: risk of limb injury. Rotating
parts.
4. Remove the plug from the power socket
before repairing the machine.
Tool engagement
Adjusting the tool height (brush)
START
STOP
4. TECHNICAL FEATURES
5. HANDLING AND PACKAGING
2 or more people are required to handle
packaging, using the handles on the card-
board box. The GROSS weight is indicated
in the "TECHNICAL FEATURES” chapter.
CAUTION!
Do not overturn or roll the machine. Pos-
sible damage to bonnets and mechani-
cal parts.
INFORMATION!
If more than one machine or interchange-
able equipment is supplied on pallets,
unload without dropping them on the
ground. Use a forklift if necessary.
6. UNPACKING/ASSEMBLY
The machine MSP 02 is delivered to des-
tination, disassembled in its own packag-
ing.
To complete the assembly please strictly
follow the procedure.
1.1 1.1
HANDLEBAR ASSEMBLY:
Fix the handlebar 1 to the support 2 using
the screws 3, washers 4, fixing knobs 5
and nuts 6.
1.2 1.2
ASSEMBLY OF GRASS BOX (OPTIONAL):
Insert metal frame 1 into cloth-bag 2.
GROSS and NET
weight
CE declaration label
on the last page
Rated power
M eas ured sound
pressure level
M eas ured sound
power level
Guaranteed sound
power level
Volume of grass-
box
45 l
Work width 420 mm
Work depth 0-20 mm
Handlebar vibration 7,4 ± 0,45 m/s²
Transmission through “V”- belt
*
1.1 1.1 1.2 1.2
*
Fix it inside clamping rims of cloth-bag by
means of a simple rounded-off toll-a spoon
handle, for A, B, C, D and F. Now you have
to lift the unit rear cover 3 and insert the
hooks 4 into the pins 5.
Complete the tightening operations
lowering the cover 3 and making attention
the bag handle ends 6 to enter the cover
slots 7.
The motor is supplied without lubricat-
ing oil. For information on the type of oil
and quantities to be used, refer to the
motor manual contained in the accesso-
ry bag.
7. USE
Check correct functioning of the main-
tained action levers and double safety
command before using the machine. See
the “CABLE ADJUSTMENT” paragraph
to make adjustments. It is forbidden to
use the machine in case of malfunction
of the controls.
Add lubricating oil to the motor before
first start-up. For information on the
type of oil and quantities to be used, re-
fer to the motor manual contained in the
accessory bag.
Before starting the machine, check the
oil level inside the motor, as indicated in
the specific user’s manual
.
Before proceeding, read and understand
the chapter "SAFETY INSTRUCTIONS”
in its entirety.
Check correct functioning of the levers
before using the machine. See the “CA-
BLE ADJUSTMENT” paragraph to make
adjustments.
1) Safety device
2) Fitting insertion lever
3) Tool transfer raising lever
4) Handle for the job depth adjustment
5) Engine
6) Grass bag (optional)
7) Handles
8) CE label
9) Accelerator lever
CAUTION!
DANGER!
CAUTION!
CAUTION!
DANGER!
DANGER!
7.1 DESCRIPTION OF CONTROLS
2.1 2.1
7.2 HANDLEBAR ADJUSTMENT