Distance to Combustible materials
Combustible materials should not be located where the heat dissipating through the walls of fireplaces or
flues could ignite it. Therefore when installing the stove in the presence of combustible materials due
account must be taken of the guidance on the separation of combustible material given in Building
Regulations Approved Document J and also in these stove instructions.
WF32/UNIQ32 INSET
WF23/UNIQ23 INSET
Distance to combustible materials rear
300mm
200mm
Distance to combustible materials side
200mm
350mm
Distance to soft furnishing in front
1100mm
1100mm
The minimum distances to flammable materials are specified on the EN 13240 plate on the back of the
stove
.
Typical installation of
an inset stove
