EUROSTER 11W Installation And Operation Manual Download Page 10

EUROSTER 11W 

 USER MANUAL 

 

 

10

 

WARRANTY CERTIFICATE

 

EUROSTER 11W

 

Warranty terms: 

1.

 

The warranty is valid for 24 months from the device sale date. 

2.

 

Claimed  controller  together  with  this  warranty  certificate  must  be  supplied  to  the 
seller. 

3.

 

Warranty  claims  shall  be  processed  within  14  business  days  from  the  date  the 
manufacturer has received the claimed device. 

4.

 

The  device  may  be  repaired  exclusively  by  the  manufacturer  or  by  other  party 
clearly authorized by the manufacturer. 

5.

 

Warranty  becomes  invalidated  in  case  of  any  mechanical  damage,  incorrect 
operation and/or making any repairs by unauthorized persons. 

6.

 

This  consumer  warranty  does  not  exclude,  restrict  nor  suspend  any  right  of  the 
Buyer ensuing if the product would not meet any of the sale contract terms. 

..................................................................................................................................

 

sale date 

serial 

number/date 

of 

manufacture 

stamp and signature 

service: telephone No. 

65-571-20-12

 

Business entity that issued this warranty certificate is: P.H.P.U. AS Agnieszka 

Szymańska

-

Kaczyńska, Chumiętki 4, 63

-840 Krobia, Poland  

 

 

Summary of Contents for 11W











Reviews: