Every information is subject to change without prior notice. 22.07.2011 ©
www.europalms.de
SNOWING CHRISTMAS TREE
10
5. Performance check
Adjust the position OFF at the controller. Insert the power unit
into your power outlet (230 V, 50 Hz~).
Distribute some snow flakes into the bottom of the base.
Make sure that no other objects can hinder the snow flake
circulation.
Switch the device on via the cable remote control. Check if
snow flakes are snowing from the tree, the lighting chain is lit
and the music plays. If not please check the contructrion and
all connections until everything works satisfactory.
6.
Final installation
Carefully place the top part on the base. Each parts has a
zipper on the side. Adjust the parts in a way that the starting
position of the zipper is the same and connect both parts.
Carefully move the tree inside in order to position the end
mounting on top of the tree in the correct position in the
cover. Attach the end mounting by turning it through the hole
7. Adjusting operating mode and fan speed
Select the desired operating mode with the mode selector:
• position
ON I
: operation without Christmas melodies
• position
ON II
: operation with Christmas melodies
• position
OFF
: turns off the unit
The fan speed and thus the snowfall can be steplessly adjusted
with the rotary control from low to high.
8. Technical Specifications
Power supply: ...................... 230 V AC, 50 Hz ~ via included
............................................. power unit 12 V AC, 1000 mA
Power consumption:............ 10 W
Dimensions (D x H):............. 920 x 1820 mm
Weight:................................. 7 kg
