Euronda AQUADIST, Instruction Manual

Page: 27 / 58

AQUA DIST
11
PART 4
CLEANING INSTRUCTIONS
Use neutral household detergent to clean the outside of the distiller and dry it (the rubber gasket
inside the upper cover is positioned in a specific direction; please do not remove).
The inside of the stainless steel tank is smooth. Never use abrasive detergents. After each cycle,
rinse the inside of the boiler with clean water.
To remove heavy deposits, use the distiller cleaner as follows:
1. Poor hot water into the boyler until it covers the deposits.
2. Pour one to four spoonfuls of cleaner (depend from the amount of deposits) into the tank.
3. Leave the upper cover off, plug in the mains plug, and turn on the distiller until the water
starts boiling.
4. Discard the water 15/20 minutes later and then wash the inside with clean water.
5. Repeat the process until the boiler is clean.
Small amounts of residue are harmless, the distiller can continue to be used safely.
If the cooling coil is clogged with dust, the efficiency of distillation may be affected. To clean the
condensing coil, remove all three screws from underneath the cover. Use a toothbrush or vacuum
cleaner to remove the accumulated dust.
Do not immerse the motor in the water while cleaning the distiller.
Residue
cleaner