GB
11
Table lamp
Safety information
•
The user of the device must have read and under-
stood these operating instructions prior to its first
use for save handling of this device.
•
The device must only be used when it functions
properly. If the device or part of the device is
defective, have it repaired by a specialist.
•
Always keep the operating instructions within
reach.
•
If you sell or pass on the device, you must also
pass on these operating instructions.
•
The light may not be used outdoors or in damp
locations.
•
Do not touch the mains plug if hands are wet!
Always unplug the mains plug at the connection,
not at the cable.
•
Do not lift the device on the cable or use the cable
for purposes other than intended.
•
Only use lamps approved by the manufacturer.
The maximum lamp performance may not be
exceeded.(
•
Supply voltage and fuse must correspond to the
technical data.
•
The fuse must be a residual current circuit-
breaker with a measured residual current of no
more than 30 mA.
•
Do not bend, squash or tear the mains cable;
keep away from sharp edges, oil and heat.
•
If the power cable is damaged immediately pull
out the plug. Never use the device if the power
cable is damaged.
•
The bulb becomes hot when used! Before chang-
ing the bulb, allow to cool.
•
The external flexible cable or cord of this lumi-
naire cannot be replaced. If the cord is damaged,
the luminaire shall be destroyed.
Changing the bulb
Cleaning
– Wipe down the device with a dry or damp cloth.
Storage and transport
Storing
– Store the device and any accessories in a dry,
well-ventilated place.
– In case of longer periods without operation, pro-
tect the device and its accessories against soiling
and corrosion.
Transport
– Use the original packaging to ship whenever pos-
sible.
Troubleshooting
If something stops working…
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposing of the device
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
The light can only be used in dry indoor
areas.
CAUTION! Danger of being burnt!
The
bulb becomes hot when used! Before chang-
ing the bulb, allow to cool.
NOTICE! Risk of damage to the device!
Do not use any sharp or abrasive objects, or
aggressive cleaning agents.
Do not use cleaning solutions.
DANGER! Danger to life and limb!
Improper repairs can result in the product
functioning unsafely. This endangers your-
self and your environment.
DANGER! Risk of fatal injury due to elec-
tric shock!
All work to eliminate possible
faults should be carried out with the fuse
switched off. All work should be carried out
by a qualified electrician.
Fault/malfunction
Cause
Remedy
The lamp does not light up
No mains voltage?
Check fuse. Contact a specialist.
Light source defective?
Check illuminant, replace if neces-
sary if possible
Luminaire switched on via switch?
Check switch position
Switch defective?
Contact a specialist.
Connection cable defective?
Contact a specialist.
Incorrect connection?
Switch off the fuse and check the
connection according to the wiring
diagram. Contact a specialist.
