AS/NZ 1716 : 2012 Lic 40344
SAI Global
FITTING INSTRUCTIONS FOR USE
Craftsman Particulate Pre-Filter 713 is used in conjunction with Craftsman Gas/Vapour filter ABEK 719, for protection
against mechanically and thermally generated particles and clogging by sanding, polishing dust, or paint particles.
• To be used with 713R Retainers to connect the 713 filter to the 719 filter.
PARTICULATE
PRE-FILTER P2
For use against
both mechanically
and thermally
generated particulates.
C713
2
Euromarc 710 Series Respirator
When generating dusts
and fumes with sanding,
grinding, cutting, polishing,
or particles from welding
or fabricating.
713
PARTICULATE
PRE-FILTER P2
713
WARNING
• Always be sure that your respirator is: a) suitable for all
expected respiratory hazards in the workplace; b) your
respirator is fitted properly – refer to manufacturer’s
instructions; c) filter is replaced when necessary.
• Do not use for respiratory protection against unknown airborne
contaminants or when concentrations of contaminants are
unknown or as protection against substances immediately
dangerous to life or health.
• Do not modify or alter filters or face-pieces.
• Use with Euromarc 710 series respiratory.
• If in doubt about the correct use or suitability of this device for
any application, consult your supervisor, occupational health
professional or contact Euromarc.
• Always check the filters have not exceeded
the use-by date.
• Provides P3 protection only with full
face-piece espirator, and P2 protection
with half face-piece respirator.
PARTICULATE
FILTER GP3
For use against both
mechanically and thermally
generated particulates.
For use against all particulates
including highly toxic materials.
C718
2
Euromarc 710 Series Respirator
When generating dusts
and fumes with sanding, grinding,
cutting, polishing, or particles
from welding or fabricating.
Working with toxic particulates
such as mould remediation.
718
PARTICULATE
FILTER GP3
718
AS/NZ 1716 : 2012 Lic 40344
SAI Global
