Air Circuit
The air flo lines need o be cleaned reg larl o pre en blockage i h par icles. The end
be ha is a ached on he back of he machine, co ld be remo ed and cleaned a he end of
he da .
For comple e Air Circ i cleaning, af er choosing he Air circ i op ion, se compressed air o
How to Clean the Air Flow Circuit
How to Use Auto Clean Setting
Auto Cleaning Settings
There 4 differen cleaning op ions: 2 for he blade (fas and deep) and 2 for he blade
and shaf (fas and deep).
As sho n on he screen, place a con ainer in he back of he machine and inser he
Air Circ i b in i .
Fill p a beaker i h a er and place i in he beaker holder.
Chose he desire f nc ion and p sh S ar .
he ime of performance of he c cle
Warning:
If water comes out of the gasket of the Locking Assembl , please check the following:
the air flow circuit for blockage or
the Locking Assembl gasket is missing, damaged or worn out
Warning:
Do not use foaming cleaning solutions/detergents, toxic solutions/detergents or harsh solutions/
detergents that could cause damage on metal, plastic, silicone.
16
Once the cycle is completed, the JMPRO will display a complete note message with
Attached the beaker holder to the JMPRO and securely lock it on the machine.
blow out the lines from the hose attached to the back of the JMPRO.
