Euromaid WM7 Manual Download Page 14

14 - EN

Clothes stiffened.

- Insufficient amount of detergent used.

- The detergent may have been placed into the 

wrong compartment; the detergent may be 

mixed with the softener.

- If the water hardness is higher, using insufficient 

amount of detergent can cause the laundry to become 

stiff in time. Use appropriate amount of detergent 

according to the water hardness.

- If detergent is put in the prewash compartment 

although prewash cycle is not selected, machine can 

take this detergent during rinsing or softener step.

- Do not mix the softener with detergent when putting 

in the compartment.

- Wash and clean the drawer with hot water.

Clothes do not smell like the softener.

- Insufficient amount of detergent used.

- The detergent was placed into the wrong 

compartment; the detergent was mixed with 

the softener.

- If the water hardness is higher, using insufficient 

amount of detergent can cause the laundry to become 

stiff in time. Use appropriate amount of detergent 

according to the water hardness.

- If detergent is put in the prewash compartment 

although prewash cycle is not selected, machine can 

take this detergent during rinsing or softener step.

Do not mix the softener with detergent when putting in 

the compartment.

Wash and clean the drawer with hot water.

Detergent residue in the dispensing drawer.
- Detergent may have been put in wet 

dispenser drawer.

- Detergent may have gotten damp.

- Water pressure might be low

- The detergent in the main wash compartment 

might have gotten wet while taking in the 

prewash water..

- Detergent might be mixed with the bleaching 

agent.

- Dry the detergent drawer before putting in detergent.

- Store detergent in a closed and dry location.

- Do not keep them under high temperatures.

- The detergent dispenser outlet (holes) may have a 

problem. 

- There might be problems with the detergent 

dispenser valves.

- Do not mix the softener with detergent when putting 

in the compartment.

There is detergent left on the laundry.
- Excessive laundry loaded into machine.

- Wrong Programme and temperature might 

have been selected.

- Wrong detergent may have been used.

- Do not load the machine in excess.

- Select the proper Programme and temperature for 

the laundry to be washed.

- Use wool detergents for woollens.

There is too much foam

.

- You may not be using proper detergent for 

automatic washing machines.

- Excessive amount of detergent may have been 

used.

- Too much detergent may have been used for a 

small amount of lightly soiled laundry.

- Detergent may have been stored improperly.

- Type of material being washed (lace items 

will cause excessive foam due to their meshed 

structure).

- Detergent might have been put in the wrong 

compartment.

- Softener being released early.

- Use only automatic washing machine detergents in 

your washing machine.

- Use only sufficient amount of detergent.

- Use only sufficient amount of detergent.

- Store detergent in a closed and dry location.

- Do not store in excessively hot places.

- Use smaller amounts of detergent for lace items.

- If you put detergent in the prewash compartment 

although you have not selected a prewash cycle, the 

machine can take this detergent during rinsing or 

softener step.

- Too much softener was put in. 

The detergent dispenser is problematic. Water is 

siphoned (pulling the softener into the washer early) 

during the fill or rinse cycles.  

Valves are problematic.

There is foaming over the detergent drawer

Too much detergent was used

Mix 1 tablespoonful softener and ½ liter water 

and pour into the main wash compartment of the 

detergent drawer.

Summary of Contents for WM7





















Reviews: