Euromaid WM7, Manual, Page: 12 / 20

12 - EN
Machine fills with water when a process is cancelled.
Inside of machine may be hot.
For safety reasons cold water is added to cool the hot
wash load
It continuously spins. Remaining time does not count down. (On models with display)
There may be an imbalance of laundry in the
machine.
- The automatic spin correction system might have
been activated due to the unbalanced distribution of
the laundry in the drum.
- The laundry in the drum may be clustered (bundled
laundry in a bag). Laundry should be rearranged and
re-spun.
- No spinning is performed when the laundry is not
evenly distributed in the drum to prevent any damage
to the machine and to its environment.
Washing time takes longer than the time specified in the manual
- Water pressure may be low.
- Supply voltage may be low.
- Input temperature of water may be low.
- There may be an imbalance of laundry in the
machine.
- Number of rinses and/or amount of rinse
water might have increased.
- The machine will wait until there is sufficient amount
of water, which will lengthen the washing time to avoid
poor washing results due to insufficient water.
- Washing time is extended to avoid poor washing
results when the supply voltage is low.
- Cycle time is extended to heat up the water when
the input water is cold. Also, washing time can be
lengthened to avoid poor washing results.
- The automatic spin correction system might have
been activated due to the unbalanced distribution of
the laundry in the drum.
- The laundry in the drum may be clustered (bundled
laundry in a bag).
- Laundry should be rearranged and re-spun.
- No spinning is performed when the laundry is not
evenly distributed in the drum to prevent any damage
to the machine and to its environment.
- Water amount is increased to obtain a better rinse
and a rinse cycle is added when necessary.
It continuously washes. Remaining time does not count down.
In the case of a paused countdown while taking
in water:
- Timer will not countdown until the machine
is filled with the correct amount of water. (On
models with display)
- Time might have gotten stuck during heating
step. (On models with display)
In the case of a paused countdown at the
spinning step:
There may be an imbalance of laundry in the
machine. (On models with display)
- The machine will wait until there is sufficient amount
of water to avoid poor washing results due to lack of
water. Then the timer will start to count down.
- Time will not count down until the selected
temperature for the Programme is attained.
- The automatic spin correction system might have
been activated due to the unbalanced distribution of
the laundry in the drum.
- The laundry in the drum may be clustered (bundled
laundry in a bag). Laundry should be rearranged and
re-spun.
- No spinning is performed when the laundry is not
evenly distributed in the drum to prevent any damage
to the machine and to its environment.
It did not spin.
- There may be an imbalance of laundry in the
machine. Therefore, the Programme might have
been completed without spinning.
- The machine will not spin if the water has not
completely drained.
- The automatic spin correction system might have
been activated due to the unbalanced distribution of
the laundry in the drum.
- The laundry in the drum may be clustered (bundled
laundry in a bag). Laundry should be rearranged and
re-spun.
- No spinning is performed when the laundry is not
evenly distributed in the drum to prevent any damage
to the machine and to its environment.
- Check the filter.
- Check the drain hose.