21
BULB REPLACEMENT
,PSRUWDQW
The bulb must be replaced by the manufacturer, its service
agent or similarly qualified persons.
$OZD\VVZLWFKRIIWKHHOHFWULFLW\VXSSO\EHIRUHFDUU\LQJRXW
any operations on the appliance. When handling bulb, make
sure it is completely cooldown before any direct contact to
hands.
When handling globes hold with a cloth or gloves to ensure
perspiration does not come in contact with the globe as this
can reduce the life of the globe.
Changing the LED light
1RWH
x
%HIRUHFKDQJLQJWKHOLJKWVPDNHVXUHWKDWWKHDSSOLDQFHLV
plugged off.
x
3URWHFWDJDLQVWGDQJHUZKHQFKDQJLQJOLJKWVVXFKDV
wearing gloves.
x
Light replacement should be carried out by qualified service personnel only.
x
Switch the unit off and pull out the plug first.
x
Loose the 4 pcs 4X10MM screws at the back of case, and then take out the
outer glass.
x
Loose the 2 pcs screws on the lamp bracket, and then change the LED light.
See pic below.
x
Remove the grease filter.
x
8QVFUHZWKHSFVVFUHZVRQWKH/('OLJKWVWULSEUDFNHWE\FURVVVFUHZGULYHU
dismantle the LED light strip and pull out the terminal of the light connecting
wire. See pic 1. (
1RWH,WZLOOQHHGWRGLVPDQWOHWKHIURQWSDQHOILUVWIRUPRGHOV
cannot directly take down the light strip.)
x
$SSO\WKHUHYHUVHSURFHGXUHWRLQVWDOOWKHOLJKWVWULSEDFN
•
,/&26'FRGHIRUWKLVODPSLV
DSL-7-S-650
–
0D[ZDWWDJH:
–
9ROWDJHUDQJH'&9
