13
MOUNTING OF THE V-FLAP
If the Rangehood does not have an
DVVHPEOHG9
-flap 1, you should mount the half-
SDUWVWRLWVERG\7KHLPDJHVRQO\VKRZDQH[DPSOHRIKRZWRPRXQWWKH9
-flap, the
outlet may be various according to different models and configuration.
7RPRXQWWKH9
-
IODS\RXVKRXOG
• Mount two half-parts 2 into the body 6
• a pin 3 should be top oriented;
• the axis 4 should be inserted in the holes 5 on body;
• repeat all the operations for the 2nd half-part
INSTALLATION
If you have an outlet to the outside, your Rangehood can be connected as below
picture by means of an extraction duct (enamel, aluminium, flexible pipe or non-
flammable material with an interior diameter of 220mm)
%HIRUHLQVWDOODWLRQWXUQWKHXQLWRIIDQGXQSOXJLWIURPWKHRXWOHW
