20
CONTROL PANEL SURFACE
The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is
clean and well wrung before
FOHDQLQJ8VHDGU\VRIWFORWKWRUHPRYH
any excess
moisture left after cleaning.
Important
8VLQJQHXWUDOGHWHUJHQW
s and avoid using harsh cleaning chemicals, strong household
detergents or products containing abrasives, as this will affect the appliance
appearance and potentially remove any printing of artwork on the control panel and
will void manufactures’ warranty.
GREASE MESH FILTERS
The mesh filters can be cleaned by hand. Soak them for about 3 minutes in water with
a grease-
ORRVHQLQJGHWHUJHQWWKHQEUXVKLWJHQWO\ZLWKDVRIWEUXVK3OHDVHGRQRW
apply too much pressure, avoid to damage it. (Leave to dry naturally out of direct sun
light)
)LOWHUVVKRXOGEHZDVKHGVHSDUDWHO\WRFURFNHU\
and kitchen utensils. it is advisable
not to use rinse aid.
INSTALLING GREASE MESH FILTERS
• To install filters for the following four steps.
-
$QJOHWKHILOWHULQWRVORWVDWWKHEDFNRIWKHKRRG
-
3XVKWKHEXWWRQRQKDQGOHRIWKHILOWHU
- Release the handle once the filter fits into a resting position.
- Repeat to install all filters.
