OPERATION
OPERATION
13
12
Setting
the
time
1. After connection to the mains or
reconnection after a power cut,the
display, shows flash “ 0.00” and
“A”.
2. Press buttons 2 and 3 simultaneously,
the signal function
is on.
“ ”
1
2
3
4
5
1
2
3
4
5
3.
The signal function
is flashing, set
the current time using buttons 4 and 5.
5 seconds after the time has been set,
the new data will be saved. The signal
1
2
3
4
5
1
2
3
4
5
3. 5 seconds after the time
is set, the
signal function
“
”is on. The new data
will be saved and the display will show
the current time.
4. Press button 1, the remainent
time will
be shown on the display.(In the last
minute,
the display will show the
remaining seconds)
1
2
3
4
5
2. Set the timer using buttons 4
“0.00” and flashing
“ ”.
Caution
!
Before any setting,press
buttons
2
and
3
simultaneously to start
the
oven
.
A
function is on.
1
2
3
4
5
Timer
The timer can be activated at any time and
any function. The timer can be set for from
1 minute to up to 23 hours and 59 minutes.
To set the timer you should:
1. Press button 1, the display will show
1
2
3
4
5
If you want to reset the timer, repeat
step 2 and set time to “0:00” .
and 5.
5. When the set time is up the alarm
signal will be activated and the signal
function“ ” starts flashing again.
1
2
3
4
5
Besides timer alarm, any other alarms can
be turned off by pressing button1, 2 or 3. If
the alarm signal is not turned off manually,
it will be turned off automatically after 7
minutes.
There are three different alarm sounds for
your choice. When the display field shows
the current time, press button 4, you can
select the alarm sound you want. Once the
alarm sound is set, it will be introduced to
the memory.
Caution
!
Semi-automatic
operation
If the oven is to be switched off at a given
time, or after defined period, you should:
1. Set the oven function knob and the
temperature
regulator knob to the
setting at which you want the oven to
operate.
2. Press buttons 2 and 3 simultaneously,
the oven will begin to work and the
function signal“ ”is on.
3. Press button 2 or 3, then the display
will show flashing “A”.
4. Set the required time using buttons 4
and 5, within a range from 1 minute to
10 hours.
5. The
set time is introduced to the
memory after
5 seconds, then the
display will show the current time. At
the same time, the function signal “A”
is on.
6. When the set time has passed, the
oven is switched off automatically, the
alarm is activated, the signal function
Caution
!
For
example
:
1
2
3
4
5
6
●
If set the cooking time to be 0 or
set
the switch-off time to be the current
time, the auto function will be off.
1
2
3
4
5
First method:
“ ”is off, and the signal function “A”
starts flashing again.
●
The cooking time and switch-off time
range
Cooking time range: 0 < t
≤
10 hours
Switch-off time range: current time <
switch-off time
≤
current time + 10
hours
Switch-off
time=current time +
cooking
●
Set the cooking time or switch-off time
When
using the semi-automatic
operation, set either the cooking time
or the switch-off time.
The current time is 2:00, the maximum
switch-off
time is set to be 12:00
(2:00+10:00=12:00).
There are two methods to achieve this
setting:
1. Press button 2, then the display will
show flashing “A”.
and alarm signal will go off.if
“ ”.
the
6. Press any button,the signal function
alarm
signal is not turned off
manually,it will
be turned off
automatically after 7
minutes.
7. Press button 1, 2 or 3 , the alarm signal
will go off. The signal “A”still flashing.
the alarm signal is not
Or if
turned off
it will be turned off
manually,
minutes.
automatically after 7
time
All manuals and user guides at all-guides.com