When you have finished cooking
1 Touching the heating zone
selection control that you wish
to switch off.
2 Turn the cooking zone off by
touching the slider to “O”. Make
sure the display shows “O”.
3 Turn the whole cooktop off
by touching the ON/OFF
control.
4 Beware of hot surfaces
“H” will show which cooking zone is
hot to touch. It will disappear when
the surface has cooled down to a safe temperature.
It can also be used as an energy saving function if
you want to heat further pans, use the hotplate that
is still hot.
To start cooking
After power on, the buzzer beeps once, all the
indicators light up for 1 second then go out, indicating
that the ceramic hob has entered the state of standby
mode.
1 Touch the ON/OFF
control.
All the indicators
show “-”
2 Place a suitable pan on the
cooking zone that you wish
to use.
•
Make sure the bottom of
the pan and the surface
of the cooking zone are
clean and dry.
3 Touching the heating zone
selection control, and a
indicator next to the key
will flash.
4 Adjust heat setting
by touching the slider
control.
•
If you don’t choose a
heat setting within 1
minute, the ceramic
hob will automatically
switch off. You will
need to start again at
step 1.
•
You can modify the heat setting at any time
during cooking.
•
You can modify the power level from 0 to 9 by
the slide control.
Using your Ceramic Hob
euromaid 600mm Ceramic Hob UsInG yOUr CeraMIC HOb
7