Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls
protruding from the hob.
Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation.
A
B
C
D
screw
bracket
screw hole
base
Adjust the bracket position to suit for different work surface’s thickness.
Installation
Cautions
1 The ceramic cooker hob must be installed by
qualified personnel or technicians. We have
professionals at your service. Please never conduct
the operation by yourself.
2 The ceramic cooker hob shall not be mounted to
cooling equipment, dishwashers and rotary dryers.
3 The ceramic cooker hob shall be installed such that
better heat radiation can be ensured to enhance its
reliability.
4 The wall and induced heating zone above the work
surface shall withstand heat.
5 To avoid any damage, the sandwich layer and
adhesive must be resistant to heat.
6 A steam cleaner is not to be used.
7 This ceramic can be connected only to a supply
with system impedance no more than 0.427 ohm.
In case necessary, please consult your supply
authority for system impedance information.
Connecting the hob to the mains
power supply
The power supply should be connected in compliance
with the relevant standard, or a single-pole circuit
breaker. The method of connection is shown below.
1 If the cable is damaged or needs replacing, this
should be done by an after-sales technician using
the proper tools, so as to avoid any accidents.
14 euromaid 600mm Ceramic Hob InsTallaTIOn