4 The cable must not be bent or compressed.
5 The cable must be checked regularly and only
replaced by a properly qualified person.
2 If the appliance is being connected directly to the
mains supply, an omnipolar circuit breaker must be
installed with a minimum gap of 3mm between the
contacts.
3 The installer must ensure that the correct electrical
connection has been made and that it complies
with safety regulations.
DISPOSAL: Do not
dispose this product
as unsorted municipal
waste. Collection of
such waste separately
for special treatment is
necessary.
This appliance is labeled in compliance with European directive 2002/96/EC for Waste Electrical and
Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help
prevent any possible damage to the environment and to human health, which might otherwise be
caused if it were disposed of in the wrong way.
The symbol on the product indicates that it may not be treated as normal household waste. It should
be taken to a collection point for the recycling of electrical and electronic goods.
This appliance requires specialist waste disposal. For further information regarding the treatment,
recover and recycling of this product please contact your local council, your household waste
disposal service, or the shop where you purchased it.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
Installation
euromaid 600mm Ceramic Hob InsTallaTIOn 15