16 EN
Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when
the programme comes to an end. If you
do not want to hear the audio warning,
press “Cancel Audio Warning” button. The
relevant light will turn on when this button
is pressed and an audio warning will not
be given when the programme comes to
an end.
C
You can select this function either before
or after the programme starts.
Warning indicators
C
Warning indicators may differ according
to the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C
If the filter cleaning warning light lights
up continuously, please refer to,
“Suggested solutions for problems”.
Water tank
Warning light starts flashing when the
tank is filled with water. The dryer stops
operating if the warning light turns on
when a programme is running. Drain the
water in the water tank to restart the dryer.
Press “Start/Pause/Cancel” button to start
the programme after you have emptied the
water tank. The warning light turns off and
the programme resumes operating.
Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. Light of the “Start/Pause/Cancel”
button will turn on to indicate that the
programme has started.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator LED will light up and
light of the completed step will turn off.
“Drying”:
- Drying level will be illuminated during
the whole drying process until the drying
degree reaches “iron dry”.
“Iron Dry”:
- Starts to illuminate when the drying
degree reaches “iron dry” step and
remains illuminated until the next step.
“Ready to wear”:
Starts to illuminate when the drying degree
reaches “Ready to wear” step and remains
illuminated until the next step.
“Final / Anti-creasing”:
- Illuminates when the program comes
to an end and anti-creasing function is
activated.
C
If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).
Changing the programme after it has
started
You can use this feature to dry
your clothes under higher or lower
temperatures after your dryer has started.
For example;
1. Press and hold the “Start/Pause/
Cancel” button for about 3 seconds
to “Cancel” the programme in order to
select “Extra Dry” programme instead
of “Iron Dry” programme.
2. Select the “Extra Dry” programme
by rotating the programme selection
button.
3. Press “Start/Pause/Cancel” button to
start the programme.
C
Press “Start/Pause/Cancel” button for
3 seconds to cancel the programme
or turn the programme selection knob
in any direction to end the programme
while the machine is running. Water
tank and filter cleaning warning lights
turn on to warn the user when the
programme is cancelled by pressing
the “Start/Pause/Cancel” button for 3
seconds. However, the warning lights
do not turn on when the programme
is cancelled by turning the programme
selection knob. Only the drying light
turns on and the machine remains in
hold until a new programme is selected
and the “Start/Pause/Cancel” button
is pressed. Child-proof lock of the
machine should not be active in order
to perform these two operations. If the
child-proof lock is active, deactivate it
before performing these operations.
Adding/removing laundry in standby
mode
In order to add or remove laundry after the
programme starts:
1. Press the “Start/Pause/Cancel” button
to switch the dryer to “Pause” mode.
Drying process will stop.
2. Open the door at “Pause” position and
close it again after adding or taking out
