17 EN
laundry.
3. Press “Start/Pause/Cancel” button to
start the programme.
C
Any laundry added after the drying
process has started may cause the
dried clothes in the machine intermingle
with wet clothes and the result will be
wet laundry after the drying process is
over.
C
Laundry may be added or taken out
as much as desired during a drying
process, but this process will extend
the programme duration and increase
energy consumption since the drying
will be interrupted continuously.
Therefore, it is recommended to add
laundry before the drying programme
has started.
Child-proof lock
There is a child-proof lock to prevent
any programme interruption due to the
pressing of button while the programme is
running. The loading door and all buttons
except the “On/Off” button on the control
panel are deactivated when the child-proof
lock is active.
Press the “Start/Pause/Cancel” and
“Cancel audio warning” buttons
simultaneously for 3 seconds to activate
the child-press lock.
To start a new programme after the
programme is over or to interrupt the
programme, the child-proof lock should be
deactivated. Press the same buttons for
3 sec. again to deactivate the child-proof
lock.
C
Child-proof lock is deactivated when the
machine is restarted by pressing the
On/Off button.
C
Press the relevant buttons for 3
seconds to activate the child-proof
lock. A long beep will be heard and
the child-proof lock will be activated. A
double beep will be heard if you press
any button or turn the programme
selection knob while the child-proof
lock is active. Press the buttons for 3
seconds to deactivate the child-proof
lock. Single beep will be heard and
child-proof lock will be deactivated.
A
A double beep will be heard if you turn
the programme selection knob when
the machine is running and the child-
proof lock is active. If you deactivate
the child-proof lock without returning
the program selection knob to its
previous position, the programme will
be terminated since the position of the
programme selection knob is changed.
The drying light turns on and the
machine remains on hold until a new
programme is selected and the “Start/
Pause/Cancel” button is pressed.
Finishing by canceling the
programme
To cancel any selected programme:
Press “Start/Pause/Cancel” button for
about 3 seconds. The “Filter cleaning”,
“Water tank” and “End/ Anti-creasing”
warning lights will turn on at the end of this
period for reminding purposes.
A
As the inside of the dryer will be
excessively hot when you cancel the
programme while the dryer is running,
activate the ventilation programme to
cool it down.
End of programme
The “End/Anti-creasing”, “Filter cleaning”
and “Water tank” warning lights on the
programme follow up indicator will turn on
when the programme comes to an end.
The door can be opened and the machine
becomes ready for a second cycle.
Press “On/Off” button to turn off the dryer.
C
Final step of the drying cycle (cooling
step) is performed without heat
application in order to keep the items
at a temperature that would not harm
them.
C
A 2-hour anti creasing programme to
prevent laundry from creasing will be
activated if you do not take the laundry
out after the programme has come to
an end.
C
If you will not take the laundry out
immediately, do not stop the dryer
before the drying process is complete.
C
Clean the filter after each drying (please
see, Filter cleaning).
C
Drain the water tank after each drying
(please see, Water tank)
