12
18. This machine gets hot when it is in use. To prevent burns, do not let bare skin come into contact with hot
surfaces.
19. Do not use a timer or a similar product to automatically switch on the heater. Always perform safety checks
before using the heater!
20. Close supervision is necessary when the product is used near children or incapacitated persons. Do not let
children use the appliance as a toy. This appliance is not suitable to be operated by children or persons who
have physical, sensory and/or mental limitations, or by persons who have no knowledge of, or experience
with, this appliance.
21. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of
overheating. Make sure these deposits are removed regularly.
22. Do not turn on the appliance if you have discovered damage to the appliance, cord or plug, if the appliance is
malfunctioning, if it has been dropped or if there are signs of any other defect. Return the complete product to
the vendor or to a certified electrician for inspection and/or repair. Always ask for original parts.
23. The heater is filled with special oil. Repairs that involve opening the oil containers may only be carried out by
the manufacturer or one of its service points. Consult them if you suspect an oil leak.
24. Do not use attachments and/or accessories that have not been recommended or supplied by the
manufacturer.
25. The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorised and qualified
persons.
26. Only use this heater for its intended purpose, and as described in this instruction manual.
Not abiding by instructions 24, 25 and 26 may lead to damage, fire and/or personal injuries. A failure to adhere to
these rules also immediately nullifies the guarantee and vendor, importer and/or manufacturer do not take
responsibility for any of the consequences!
Description
1
– Power switches
2
– Thermostat dial
3
– Handle
4
– Oil filled fins
5
– Swivel casters
6
– Power cord spool with plug connection
7
– Powercord with plug
8
– Turbo button
Installation, Location and Connection
Remove all packaging material and keep out of reach of children. After removing packaging, check the
appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not
use the appliance, but contact your vendor for inspection or replacement.
Screw the 2 x 2 swivel castors (3) with the 4 capped nuts (2) onto the ends of the two wheel supports (1).
The wheels should be at the hollow side!
Turn the radiator upside-
down (make sure you don’t scratch the paint or the floor!)
