19
LED display
The LED display will go dark if no adjustments are
made for 3 minutes. The LED display will light up
again when you press a button.
Status indication (Figure 6, pos. 1):
•
The 3 sun symbols indicate whether the
heater is set to low, medium or high capacity.
•
The ventilator symbol indicates if the turbo
ventilator is enabled.
•
The “
P
”
indicates that the program function is
active.
•
The “M”
indicates that the manual function is
active.
Figure 6
Temperature indication (Figure 6, pos. 2):
•
SET indicates that the required temperature is shown on the display.
•
ON indicates that the heater is switched on.
•
OFF indicates that the heater has been switched off by the ON/OFF button.
•
Temperature shown in degree Celsius.
Time indication (Figure 6, pos. 3):
•
Time shown in 24-hours format.
•
The timer symbol indicates when a timer is set.
Remote control*
1.
ON/OFF button
2.
Max button
3.
ECO button
4.
Frost button
5.
Minus button
6.
Timer button
7.
Plus button
8.
Graph button
9.
Ventilator button
10.
Mode button
*Batteries not included
Figure 7
