25
25
English
Technical data
Type
Siena
Supply voltage
Volt/Hz
220-240 / 50
Maximum capacity
Watt
1800
Settings
0
–900-1800W
Bulb
LED
Dimensions
cm
11,7 x 65,5 x 52
Weight
kg
12,5
Batteries remote control
2 x AAA 1,5V (not provided)
General safety instructions
1.
Read this instruction booklet carefully and fully before use.
2.
Before use, check your new fireplace (including cable and
plug) for any visible damage
. Never use a damaged fireplace but take it
back to the supplier for a replacement.
3.
This fireplace may only be used once it has been hung
. Do not
use until it has been installed as per instructions!
4.
This fireplace is exclusively intended for normal, household
usage
. Only use for providing additional heating in your home.
5.
This fireplace is not suitable for use in wet or damp spaces
such as bathrooms, wash rooms etc
. Do not place in the direct
vicinity of a tap, water source or similar and ensure that it cannot fall into water
and that water cannot enter the device. If the cable falls into water make sure you
remove the plug from the socket! Do not use a fireplace that is wet inside but
take it to be repaired. Never immerse the fireplace, cable or plug in water or any
other fluid and never touch the fireplace with wet hands.
6.
The connection voltage and frequency, as given on the
device, must correspond to that of the socket to be used
. The
electrical installation must be protected via an earth leakage circuit breaker (max.
30 mAmp.). Never place the fireplace nearby, under or facing a socket or in the
vicinity of an open fire or heat source.
7.
Extend the electric cable fully before inserting plug into
socket and ensure that it does not come into contact with the
