EUROM 342178, Operating Manual

Page: 36 / 92

36
plug is removed from the socket. The set Smart timer data can only be checked
via the App and also only be removed via the App. Bear this in mind when
entering the data into the Smart Timer. The Smart Timer data is not visible on
the heater. Regularly check in the App whether the entered Smart Timer data
are still correct.
You can consult an elaborate Eurom Smart App user manual with the QR code
below:
or on the website: http://www.eurom.nl/nl/manuals
Timer:
The Wall Designheat 2000 Wi-Fi has a timer function that can be
used with the app.
Overheating safeguard
In case of internal overheating, the overheating safeguard will switch the heater off. This
may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh
air. As mentioned above, this is generally caused by (partially) covering the heater,
obstructing the air intake and/or outlet grills or installing the heater too close to a wall or
ceiling or something similar. When the heater has cooled down sufficiently, it will in
principle start again automatically, however if you do not remove the cause of the cut-off
then this will probably be repeated. Regular overheating can give rise to irreparable
damage. If the overheating protection switches the heater off, then you must set the main
switch to OFF (O), unplug and allow the heater to cool down. Remove and/or amend the
cause of overheating and reuse the heater as normal. If you cannot find a cause and
overheating recurs, stop using the heater, and take it in for inspection/repair.
Cleaning and maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of
overheating so these should be removed regularly. Switch off the heater, remove the plug
from the socket and allow the heater to cool down before cleaning or carrying out
maintenance work.

Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use
aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!

Using a vacuum cleaner, carefully remove any dust and dirt from the grills and ensure
that the air intake and outlet openings are clean. Be careful not to touch or damage
any internal parts during cleaning!