• Fitting:
Steel and PVC
• Lamp type:
1 x R80 E27maximum 60W
• Protection against electric shock:
Class 2. Does not require earth connection.
•
IP Rating:
IP20. Protected against solid foreign objects of 12.5mm Ø and greater,
not protected against water.
• Not for outdoor use.
• Maximum Ambient temperature range:
20ºC - 40ºC
• Dimensions:
(H) 365mm X (Ø)130mm
• Feature:
On / off switch
• Before installation always ensure the power supply is turned off.
• Unpack and place the luminaire on a flat surface.
• Insert the lamp into the lamp holder.
• Plug into the electrical outlet.
• To switch the desk lamp on: Set the On/Off switch to (ON) position.
• To switch the desk lamp off: Set the On/Off switch to (OFF) position.
• Before unplugging the desk lamp from the power supply set the On/Off switch to
(OFF) position.
• Before replacing the lamp always unplug the desk lamp from the power supply
and allow to cool down.
• Ensure that the correct lamp type and wattage is fitted.
T30W / T30B - attachments:
If the external flexible cable or cord of this luminaire is damaged, it should be
exclusively replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard. To ensure that you get maximum longevity and
maximum use out of your luminaire, please observe the following safety
instructions.
Electrical products can cause death, injury, or damage to property. Installation
of the luminaire must be carried out by a qualified electrician, in accordance
with SANS 10142. On completion of installation, ensure that the Certificate of
Compliance is updated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label
corresponds with the mains voltage in your home.
• When changing the lamp, ensure that the power is turned off.
• This luminaire is checked in full for conformity to the quality standards and safety
requirements.
• The manufacturer / supplier is not responsible for any damage of properties and
persons, caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a
professional electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, I.E. Using silicon sealers or incorrect cabling, will
invalidate your warranty.
• Please check whether the connection of the power cord is safe and reliable before
installation.
• Always ensure that the mains supply voltage is correct.
• Always replace the lamp with one of an identical rating.
• Ensure that you do not place the luminaire near any combustible materials and /
or surfaces.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the fitting does not come in contact with corrosive chemicals, etc.
