Eurolux ED1 10P5 V, Installation Manual

Page: 126 / 164

126
EN
6. THE CONTROL PANEL
P
1 3 2 4 5 iii i ii
1. On/O b
utton
2.
Program Selection Button
3. Display
4.
Delay Button
5.
Half Load Button
i. Half Load Led
ii. Salt Indicator
iii. Rinse Aid I ndicator
6.1 On/Off Button
Switch the machine on by pressing
On / O
button. When machine is on, "--"
will be shown on the Display
(3) .
6.2 Program Selection Button
Select a suitable programme for your
dishes by pressing Program Selection
button. The programme will start auto-
matically when the door is closed.
6.3 Display
The Display shows the number and to-
tal time of the selected programme al-
ternately and the remaining time during
operation.
6.4 Delay Button
Press the Delay button to delay the start
time of the selected programme for 1
hour up to 19 hours. Pressing the but-
ton once delays the start time for 1 hour,
and continuing to press will increase the
delay time. Press the Delay button to
change or cancel the delayed start. If
you switch o the machine while delay
timer is active, the delayed time is can-
celled.
6.5 Half Load Button
Press the Half Load button to reduce the
duration of the selected programme, and
therefore decrease your energy and water
consumption. When Half Load option is
selected, Half Load led
(i)
will illuminate.
NOTE:
If you decide not to start the
selected programme, please see
the "Changing a Programme" and "Can-
celling a Programme" sections.
NOTE:
When there is insu
cient
softening salt, the Salt Lack Warn-
ing Indicator (ii)
will illuminate to indicate
the salt chamber needs
fi
lling.
NOTE:
When there is insu
cient
rinse aid, the Rinse Aid Lack Warn-
ing Indicator (iii)
will illuminate to indi-
cate the rinse aid chamber needs
fi
lling.
Changing a Programme
Follow the steps below to change a pro-
gramme while in operation.
P
Open the door and select a new pro-
gramme using the Programme Selection
button.
After closing the door, the new programme
will resume the course of the old pro-
gramme.