Eurolux EBO910DT, Operation & Maintenance Instructions Manual

Page: 15 / 20

13
MAINTENANCE AND CLEANING
Changing the light bulb
WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
•
Wear protective gloves to change the light bulb.
•
To make the replacement, proceed as follows:
1. Disconnect the power supply from the power socket or switch off the circuit breaker of the unit's power socket.
2. Unscrew the glass lamp cover anticlockwise (note that it might be stiff) and change the light bulb with a new one
of the same type.
3. Screw the glass lamp cover back into place.
NOTE: Use only halogen lamps 25-40 W / 220 V-240 V, T300°C.
Disassembly of convection motor
WARNING: Turn off the electrical power supply to the appliance prior to servicing it. Failure to disconnect the power supply
during service may result in an electrical shock or fire hazard.
Step 1: Use a screwdriver to remove the screws on the back of the cavity inside to disassemble the convection motor cover,
and then pull it out from the clipping hole.
Step 2: To reassemble the convection motor cover, perform the operations described above in reverse.
CLIPPING
SCREW