Eurolux EBO910DT, Operation & Maintenance Instructions Manual

Page: 14 / 20

12
MAINTENANCE AND CLEANING
Removing the appliance door
•
Open the oven door completely
•
Position the hooks "A" of the hinges outwards (Fig.7)
•
Slowly close the door to reach the hooks "A", making sure that they lock in the slots "B" of the door, as shown in
Fig.8
•
Using both hands, press lightly inwards on the door, allowing the door hinges "C" to detach from the slots "D" (see
Fig.9), and pull the door towards yourself until it has unhooked from the oven.
•
After cleaning, fit the door back on properly by following the procedure in reverse order. Repos ition the hooks “A”
inwards before closing the door (Fig.10)
CLEANING THE OVEN DOOR
•
After removing the oven door from the framework, place it on a surface with the inner glass (double glazing) facing
towards yourself (Figure 3)
•
Remove the double glazing carefully by raising it approximately 25 degrees (Figure 4) until the retaining
•
springs unhook
•
Push the double glazing in the direction of the arrow (Figure 5) and pull it completely out in order to proceed with
cleaning. At this point you can also remove the middle glazing in the oven door (follow the procedure of Figure 6)
and proceed with cleaning.
•
When cleaning is completed, fit the parts back on by following the reverse procedure to that described above to
put the oven door back into its original condition.