LUBE-MASTER R10
10(16)
PM: ‡
PM MainMenu
JobDB: ‡
PM MainMenu
AddJOB: ‡
Add JOB number
‡
Add JOB number
PM: ‡
PM MainMenu
JOBDB: ‡
PM MainMenu
AddJOB: ‡
Add JOB number
DelJOB: ‡
Delete JOB no
JOB:XXXXX ‡
Up/Down ENTER
XXXXX ‡
Up/Down ENTER
JOB:XXXXX ‡
Up/Down ENTER
8. JOB database
The system can be set up to use JOB number validation. This is used to restrict oil dispensing to valid jobs only.
8.1. Add Job number
[PM//JobDB/AddJob]
Enter menu
[PM//JobDB]
by pressing
three times.
At
JobDB:
press
ENTER
.
At AddJob: press ENTER.
Type the
JOB number
(max 8 characters) and then
ENTER
to acknowledge.
Press
EXIT
three times to leave SET-UP mode.
8.1.1. Using wildcard characters.
If the printer module is equipped with a FLASH chip (yellow label) the use of wild card characters are possible.
This feature can be used to make the system to only accept JOB numbers with a certain layout.
The wild card feature supports three different wildcard placeholders.
?
Accepts any alphanumeric character in this position
#
Accepts any numeric character in this position
@
Accepts any alphabetic character in this position
Below there are some samples of how to use wildcards.
ABC###
results in ABC123 valid but not ABC1234 or ABC12D
???????
7 signs must be typed
SE@@@@
6 characters is OK as long as it the 2 first are SE
####
4 or 5 figures are OK
#####
8.2. Delete Job number
[PM//JobDB/DelJob]
Enter menu
[PM//JobDB]
by pressing
three times.
At
JobDB:
press
ENTER
.
At
AddJob:
press
.
At DelJob: press ENTER.
Type the
JOB number
(max 16 characters) and then
ENTER
to acknowledge.
Press
EXIT
three times to leave SET-UP mode.