PART NO 12740-41/12745-46 / ART.NR. 12740-41/12745-46
AiR OPeRATed sTAiNless sTeel PumP
www.eurolube.com
2
EUROLUBE EQUIPMENT
205149
Manual 22770_EN_SE_1D
3(11)
1.
(EN) General
The air operated pump has two main parts. One double acting air motor driving a double acting liquid pump.
The fluid is sucked into the pump through the bottom valve when the piston is on the upward stroke. The fluid is
discharged in both up- and downs strokes.
The relationship between then area of the air piston and area of the pump decides the pressure ratio. The pressure
ratio is 4:1 and the theoretical pressure when the pump has stopped is 4 times higher than the air pressure.
The exhaust air is blown out through a silencer made of sintered brass.
All parts in contact with fluid are made of stainless steel (ISO 2346 and similar). The central bar is nickel plated.
All packings in contact with fluid are manufactured of PTFE (Teflon).
Important! Avoid operating the pump without fluid present, running the pump dry will damage the packings.
For the same reason it is recommended to prime the pump with fluid before starting it.
1.1. Safety precautions
•
The pump is to be used with water based fluids like windscreen liquid, glycol/water mixture and non-
lubricant fluids like kerosene, white spirit, lacquer solvent and similar.
The pump may not be use for pumping petrol.
•
Check that all accessories and components are suitable for the distributed fluid and the working pressure of
the system.
•
The system must be tested to 1.3 times the working pressure before being put into operation.
•
Do not exceed the maximum air pressure of the pump, 1.0 MPa.
•
Close and disconnect the air supply and relieve the liquid pressure in the system before any work to the
pump or system is carried out
•
Only use genuine manufacturers spare parts. Never use worn or damaged spare parts.
•
Do not direct outlet valves or any other dispensing valve against the body or any other person as the liquid
can penetrate the skin or damage the eyes.
•
Always turn off the air pressure to the pump when the premises are unattended.
Technical data
Tekniska data
Pressure ratio
4:1
Tryckförhållande
4:1
Total length
585mm/ 23”
Totallängd
585mm
Pump tube length
220mm/ 8.6”
Pumprörslängd
220mm
Pump tube diameter
Ø 54 mm/ 2.1”
Pumprörsdiameter
Ø 54 mm
Air motor diameter
Ø 80 mm/ 3.15”
Luftmotordiameter
Ø 80 mm
Stroke length
Approx. 100mm /4”
Slaglängd
ca 100mm
Weight
9.0kg/ 19.8 lbs
Vikt
9.0kg
Max. air pressure
1 Mpa/ 145 psi
Max. lufttryck
1 Mpa
Min. air pressure
0.4 Mpa/ 58 psi
Min. lufttryck
0.4 Mpa
Max. fluid pressure
4.0 Mpa/ 580 psi
Max. vätsketryck
4.0 Mpa
Burst pressure
Min. 10.0 Mpa/ 1450 psi
Sprängtryck
Min. 10.0 Mpa
Free delivery (water at 0.7
Mpa/100 psi air pressure)
Approx. 30 l/min
Fritt avgivet vätskeflöde
(vatten vid 0.7 Mpa
lufttryck)
ca. 30 l/min
Recommended max.
delivery
Approx. 20 l/min
Rekommenderat max. flöde
ca. 20 l/min
Air connection
BSP ¼” female/ G ¼”
Luftanslutning
G ¼” inv.
Fluid outlet
BSP 1” female/ G 1”
Vätskeutlopp
G 1” inv.
Fluid inlet
BSP 1” female/ G 1”
Vätskeinlopp
G 1” inv.
Noice level at 0.7 Mpa/100
psi
84 dB
Ljudnivå vid 0.7 Mpa
lufttryck
84 dB
Drumadapter,
111 72 77
Included
Fatadapter,
111 72 77
Ingår
Suction tube,
1
22 62
9
4,
required when mounting
in drum
Not included
Sugrör,
1
22 62
9
4, för
användning vid fatmontage
Ingår ej
