00081193, Version 1.0
33/39
SET
• Press
[MODE/ESC]
to enter the main menu
“SET"
(display flashing)
• Press
[ENTER]
and select
"REST”, "MOVE“, "UI“, "CALI“, "VER“ or "LOAD“
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
for selecting the desired sub menu.
REST
Reset
With this function you can Reset the device via the Control Board.
• Select
“REST”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
MOVE
PAN Reverse
With this function you can reverse the PAN-movement.
• Select
“RPAN”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you
don’t.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
TILT Reverse
With this function you can reverse the TILT-movement.
• Select
“RTIL”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you
don’t.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
Select PAN degree
With this function you can select the PAN-degree.
• Select
"DEGR"
by pressing
[UP]
button.
• Press
[ENTER]
, the display shows
“540”
.
• Press
[UP]
to select the desired degree
"630"
or
"540"
.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
Automatic PAN/TILT correction (Feedback)
With the function
"ENCO"
you can adjust the PAN/TILT movement to the correct starting
position.
• Select
“ENCO”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“ON”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you
don’t.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
Adjust PAN/TILT speed
With this function you can define the PAN/TILT speed. You can select one of two different
modes.
• Select
"MODE"
by pressing
[UP]
button.
• Press
[ENTER]
, the display shows
“MOD1”
.
• Press
[UP]
to select the desired degree
"MOD2"
or
"MOD1"
.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
