00092677.DOC, Version 1.0
24/28
Control Board
The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
The main menu is accessed by pressing Menu until the display is lit. Browse through the menu by pressing
Up or Down. Press Enter in order to select the desired menu. You can change the selection by pressing Up
or Down. Press Enter in order to confirm. You can leave every mode by pressing Menu. The functions
provided are described in the following sections.
Main menu
Sub menu
Function
Addr
A001 ~ A512
DMX address setting
CHnd
09 CH/ 11 CH
DMX channel mode
SLnd
MAST/SL 1/SL 2
Master/Slave setting
SHnd
SH0/SH1/SH2/SH3
Auto program SH0 – SH3
Soud On/oFF Music
control
SEnS
0 -99
Mic sensitivity
blnd
blAC/Auto/Soun/HoLd
Run if no DMX
LEd
OFF/ON
Display turn off
dISP No/Yes
Display reverse 180 degree
rPAn No/Yes
Reverse movement
rTIL No/Yes
Reset No/Yes Reset
Addr / DMX address setting
With this function, you can adjust the desired DMX address via the Control Board.
CHnd / DMX channel mode
With this function, you can select the desired DMX channel mode.
SLnd/Master / Slave setting
With this function, you can define the device as master or slave. You can choose one of two different Slave
programs.
SL 1 = Synchronous movement, SL 2 = Asynchronous movement
SHnd / auto program
Auto mode (SH0 – SH3)
With this function, you can run 4 different internal programs.
Soud / music control
With this function, you can run the internal program sound-controlled.
SEnS / Mic sensitivity
With this function, you can select the desired microphone sensitivity between 0 % and 99 %.
blnd / no DMX status
With this function, you can set different modes if there is no DMX-signal.
LEd / Display turn off
With this function, you can shut off the display.
dISP / display reverse
With this function, you can flip the display by 180° for a better view when the fixture is hung from the truss or
a ceiling.
rPAN / Invert PAN
With this function, you can reverse the PAN-movement.
rTIL / Invert TILT
With this function, you can reverse the TILT-movement.
rESt / Reset
With this function you can reset the device via the Control Board.
