EuroLite LED Pixel Panel 16 DMX, User Manual, Page: 10 / 15

00049912.DOC, Version 1.4 23/28
Connection between devices
There is a power output connector and a power input plug on the rear panel. Connect one output with the
input of the next fixture until all fixtures are connected.
Please note: A maximum of 8 LED Pixel Panels may be linked together. After every 8 LED Pixel Panels,
the fixtures must have a renewed connection with the power mains.
OPERATION
The device has two operating modes. It can be operated via DIP switches in Stand Alone mode or it can be
run via a DMX controller in DMX-controlled mode.
After you connected the LED Panel to the mains, it starts running.
OPERATION VIA DIP SWITCHES
Function:
Color change and Color fade
Speed via
Dip8 Dip6 -
Program Selection via Dip1 - Dip5
Speed via Dip6 - Dip8
Sound controlled color change
See DMX Protocol
Black Out
1. DMX address is 1 in DMX Mode
2. Slave device in M/S Modus
Mode:
Dip
1
Dip
2
Dip
3
Dip
4
Dip
5
Dip
6
Dip
7
Dip
8
Dip
9
Dip
10
0 0
X X
X X X X X X
22 Internal
Sound-
control
DMX
X 0 0 0 0 0 X X
1 0
X X X X X X X X
X X X X X X X 1
1 0
1
X
1 0 0 0 0 0 0 0
Programs
(Master)
0 0 0 0 0 0 0 0
1 0
Other
0 0
Auto
(Master)
1 = on
0 = off
X = variable
Auto Mode
In order to select Color change and Color fade , set DIP switch 9 and 10 to OFF. Set DIP switches 1 – 5 to
OFF as well.
Speed can be adjusted via DIP switches 6 - 8.
Internal Programs Mode
In order to select from the 22 Internal Programs , set DIP switch 9 and 10 to OFF.
Programs can be selected via DIP switches 1-5 (see following table).
Speed can be adjusted via DIP switches 6 - 8.
Sound Control
In order to select Sound controlled color change , set DIP Switch 9 to ON and DIP Switch 10 to OFF.