00125717.DOCX, Version 1.0
22/28
OPERATION
After connecting the device to the mains it is ready for operation. The display lights up and you can choose
the desired mode via the buttons MENU, ENTER, UP, DOWN.
The device has two operating modes. It can be operated in stand-alone mode via the control board and the
EUROLITE IR-13 remote control or in DMX-controlled mode via a standard DMX controller and wireless via
QuickDMX with the optional available EUROLITE QuickDMX USB Wireless Transmitter/Receiver.
Stand-alone mode
In the stand-alone mode, you can do without a controller. Disconnect the device from the controller and call
the desired setting. Please refer to the instructions under Control Board.
Control Board
The Control Board offers several features: you can easily set the starting address or select a DMX channel
mode.
Browse through the menu by pressing Up or Down. Press Enter in order to select the desired menu. You can
change the selection by pressing Up or Down. Press Enter in order to confirm. The functions provided are
listed in the following sections.
Default settings shaded.
Menu
level 1
Menu level 2
Description
ADDR
001-512
DMX start address setting
CHMD
2CH, 3CH, 4CH
Setting DMX channel mode
FLAS
00-99
Strobe effect
(Master)
00-99 (with increasing speed)
UL--
000-255
Dimmer intensity
(Master)
000 – 255 (increasing)
GOBO
000-255
Gobo rotation
(Master)
000-150 Gobo indexing
151-200 Forwards gobo rotation with increasing speed
201-205 No rotation
206-255 Backwards gobo rotation with increasing speed
LED
10S/30S/
60S/90S
Display shutoff
Shuts off the display after about 10, 30, 60 or 90 seconds
MODE
off-dIn4
Dimmer speed (step response)
off: Response characteristics of LEDs
dIn1: Response characteristics of halogen lamps, fast
dIn2: Response characteristics of halogen lamps, less fast
dIn3: Response characteristics of halogen lamps, middle
dIn4: Response characteristics of halogen lamps, slow
VERN
VX.X
Firmware version
REST
YES/NO
Restore factory settings
All settings will be set back to the default values (shaded).
