EuroLite LED KLS-170, User Manual

Page: 23 / 32

00121009, Version 1.1 23/32
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating mode.
The operating modes can be selected by means of the display and the control buttons. All settings remain stored
even if the device is disconnected from the mains. The device can be operated in stand-alone mode via the control
board and the IR remote control or in DMX-controlled mode via any commercial DMX controller.
Operating buttons
Button Function
MENU Selects the operating mode or returns to the initial screen.
ENTER
Activates a value to be modified or saves a value when modifying.
UP Selects the next menu item or increases values when modifying.
DOWN Selects the previous menu item or decreases values when modifying.
Menu structure
Mode Display Function
Aut Automatic mode
Spots
AutP AP01—AP17 Show program 1-17
S.01—S.99 Running speed slow fast
Strobe LEDs
AutF AF01—AF12 Show program 1-11
S.01—S.99 Running speed slow fast
Spots and
strobe LEDs
AutM AM01—AM03 Show program 1-3
S.01—S.99 Running speed slow fast
Sou Sound control
Spots SouP SP01—SP12 Show program 1-12
Strobe LEDs SouF SF01—SF11 Show program 1-11
Spots and strobe
LEDs
SouM SM01—SM03 Show program 1-3
CoL Color mode
Spots and
strobe LEDs
CoLo
R.000—R.255 Red 0-255
G.000—G.255 Green 0-255
B.000—B.255 Blue 0-255
S.000—S.099 Strobe effect slow fast
SYN Sync mode
Sync mode
SY-A S.001—S.099
Automatic mode
Running speed slow fast
SY-M Sound control
dПH DMX mode
Start address d*** Start address (read only)
Channel mode
03CH 3 channels
06CH 6 channels
16CH 16 channels
25CH 25 channels
Start address d001—d*** Start address
SLA Master/slave mode
Slave mode S.001—S.255 Slave address
SYS System settings
System settings
M-En
ON Master mode activated
OFF Master mode deactivated
W-En
ON Antenna for foot switch is activated
OFF Antenna for foot switch is deactivated
IrEn
ON IR remote control activated
OFF IR remote control deactivated
tESt
Test mode for the LEDs; IR remote control with
ON/OFF and foot switch with BLACKOUT
rSEt Resets to factory defaults