00121009, Version 1.1
24/32
Notes
•
Approx. 5 seconds after pressing the last button, the setting procedure in the sub menus is aborted.
• SLAV
or
d***
modes: If no control signals are available, the display will be flashing.
•
While menu
AutP, AutF, AutM, SouP, SouF
or
SouM
is selected, all LEDs are switched off; in the sub
menus they will be switched on again.
•
The sync mode is a new functionality for Eurolite devices. Similar to the master/slave operation, it is
possible to interconnect several devices and control them collectively. If one device is set to sync mode, all
other units will respond to its control signals (from 10 devices).
S
tand-alone mode
Automatic mode
In automatic mode, different show programs are available that run at an adjustable speed.
1
Press the
MENU
button so many times until
Aut
for automatic mode is indicated in the display. Confirm
with the
ENTER
button.
2
Use the ▲ and ▼ buttons to select the desired program mode:
AutP
= spots,
AutF
= strobe LEDs or
AutM
for a combination of all devices. Confirm with
ENTER
.
3
Use ▲ and ▼ to select the number of the desired program. Confirm with
ENTER
. The display indicates
menu item running speed.
4
Use ▲ and ▼ to adjust the running speed of the program from
S.01
(slow) to
S.99
(fast). Confirm with
ENTER
.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1
Press the
MENU
button so many times until
Sou
for sound control is indicated in the display. Confirm
with the
ENTER
button.
2
Use the ▲ and ▼ buttons to select the desired program mode:
SouP
= spots,
SouF
= strobe LEDs or
SouM
for a combination of all devices. Confirm with
ENTER
.
3
Use ▲ and ▼ to select the number of the desired program. Confirm with
ENTER
.
4
Adjust the microphone sensitivity to the volume of the music with the
SENSITIVITY
control. The LEDs do
no light if the volume is too low or if there is no sufficient bass beat.
Individual color mix
In the color mode
CoLo
the white and UV strobe LEDs light and the spots light constantly in red, green and
blue. It is possible to adjust the flash frequency of the strobe LEDs and the brightness of the spots.
1
Press the button
MENU
so many times until
CoL
is indicated in the display. Confirm with the
ENTER
button. The display indicates
CoLo
.
2
Press
ENTER
. Now the display indicates the letter
R
for the color and the corresponding brightness
value.
3
Use the ▲ and ▼ buttons to adjust the desired brightness.
4
Confirm with
ENTER
. Now the color green can be adjusted; then blue.
5
The stetting of the strobe LEDs is the final menu item. Use ▲ and ▼ to select the number of the desired
flash frequency from
S.01
(slow) to
S.99
(fast).
Summary of Contents for LED KLS-170
Page 31: ......
