00079552.DOCX, Version 1.1
14/20
There must never enter any liquid into power outlets, extension cords or any holes in the housing of the
device. If you suppose that also a minimal amount of liquid may have entered the device, it must immediately
be disconnected. This is also valid, if the device was exposed to high humidity. Also if the device is still
running, the device must be checked by a specialist if the liquid has reduced any insulation. Reduced
insulation can cause mortal electrical shock.
There must never be any objects entering into the device. This is especially valid for metal parts. If any metal
parts like staples or coarse metal chips enter into the device, the device must be taken out of operation and
disconnected immediately. Malfunction or short-circuits caused by metal parts may cause mortal injuries.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
Keep away children and amateurs!
Batteries
Batteries are hazardous waste which need to be disposed of appropriately. If the device is to be disposed,
the batteries have to be removed first.
Make sure that the poles are correct when inserting the battery.
Never let batteries lying around openly as there is the danger that these can be swallowed by children or
domestic animals. Immediately consult a doctor when batteries are swallowed!
Leaking or damaged batteries can cause irritations when getting into contact with the skin. In this case use
appropriate protective gloves.
Make sure that the batteries cannot be short-circuited, thrown into the fire and be charged. There is a danger
of explosion.
OPERATING DETERMINATIONS
The LED BC-8 beam effect is a light effect unit which produces unique mirror ball effects through its circular
rotations. The light effect uses bright red, green, blue, amber and white LEDs with a long life.
The light effect is provided with a built-in loudspeaker and an audio player for MP3 files from USB storage
devices and SD(HC) cards. An IR remote control is provided for convenient control of the audio player.
The light effect is designed for applications on stage, in discotheques or party rooms.
This product is allowed to be operated with an alternating voltage of 100 - 240 V, 50/60 Hz. The IR remote
control operates with a CR 2025 button cell. The devices were designed for indoor use only.
Light effects are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
HEALTH HAZARD!
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
