00124916, Version 1.2
34/36
17
Master dimmer
000 – 255
Total brightness (0 – 100%)
18
Laser
000 – 005
No function
006 – 046
Laser red
047 – 087
Laser green
088 – 128
Laser red + green
129 – 169
Laser red green
170 – 210
Laser red + green strobe
211 – 255
Laser red + green strobe alternating
19
Strobe – Laser
000 – 005
No function
006 – 250
Strobe frequency with increasing speed
251 – 255
Sound control strobe
20
Automatic
programs/
sound control
programs
000 – 005
No function
006 – 040
Program 1
041 – 076
Program 2
077 – 112
Program 3
113 – 148
Program 4
149 – 184
Program 5
185 – 220
Program 6
221 – 255
Program 7
21
Auto program
speed/
sound control
000 – 250
Increasing speed of the automatic programs
251 – 255
Sound control
22
Rotation
000 – 000
No function
001 – 127
Backwards rotation, with increasing speed
128 – 128
Stop
129 – 255
Forwards rotation, with increasing speed
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1 Disconnect the device from power and allow it to cool.
2 Open the fuse holder of the mains connection with a fitting screwdriver.
3 Remove the old fuse from the fuse holder and replace it with a new fuse.
4 Carefully push the fuse holder back into its position before reapplying power.
Summary of Contents for LED B-40
Page 2: ...00124916 Version 1 2 2 36...
