00037043.DOC, Version 2.0
12/16
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
Batteries are hazardous waste which need to be disposed of appropriately. If the device is to be disposed,
the battery has to be removed first.
Make sure that the poles are correct when inserting the battery.
Never let batteries lying around openly as there is the danger that these can be swallowed by children or
domestic animals. Immediately consult a doctor when batteries are swallowed!
Leaking or damaged batteries can cause irritations when getting into contact with the skin. In this case use
appropriate protective gloves.
Make sure that the battery cannot be short-circuited, thrown into the fire and be charged. There is a danger
of explosion.
Features
Electric screen with remote-control
• Motorized Wall Screen for XXL entertainment
• Projection screen in 4:3 or 16:9 aspect ratio
• Gain-factor of 1.0 for universal use
• Screen type D (diffuse) for even light reflection
• Matt, white canvas for genuine projections
• Bar-tensioned canvas to keep the fabric flat and immobile
• With surrounding black border top, bottom, right and left
• Suitable for all LCD-beamers and DLP-beamers
• Light-proof due to black back
• White steel-sheet housing in a modern look
• Operation via low-noise motor
• Stepless height adjustment with automatic endstop
• Controlled via switch or infrared remote-control
• For wall or ceiling mounting
• Ready for connection with power plug - no electrician needed!
• For home cinema, party room etc.
INSTALLATION
The projection screen should be installed in a way that all spectators have a perfect viewing angle.
Define the installation height from the screen use. If you want to install the screen for a sitting audience, the
screen's bottom should be at eye's height of the sitting spectator.