00107903.DOC, Version 1.1
29/36
DMX operation
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 23 control channels.
However, it can also be switched to a mode with 4 or 7 channels if different functions are required. To be
able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller’s documentation.
1 Press the
MENU
button so many times until
Addr
is indicated in the display. Confirm with the
ENTER
button.
2 The display indicates
4 CH
(4 DMX channels),
7 CH
(7 DMX channels) or
23 CH
(23 DMX channels).
Use the buttons
UP
and
DOWN
to select the desired DMX channel mode. Confirm with the
ENTER
button.
3 Now the display indicates the menu item for the DMX start address
d***
. Use the buttons
UP
and
DOWN
to set the address. Confirm with the
ENTER
button.
4 The display will not flash when DMX signals are being received. If no control signals are available, the
display will flash.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
The LEDs of the device are organized into LED groups in each spot, which can be individually controlled with
the following DMX-protocol.
The spots are arranged as shown in the graphic below.
IR
1
2
3
4
DMX protocol
4-Channel-Mode
Channel:
Value
Function:
1
000 – 005
No function
006 – 010
Amber
011 – 015
White
016 – 020
Red
021 – 025
Green
026 – 030
Blue
031 – 035
LED Group
1
: White
036 – 040
LED Group
2
: White
041 – 045
LED Group
3
: White
Summary of Contents for 51918574
Page 1: ......
Page 19: ...00107903 DOC Version 1 1 19 36 110 mm 850 mm 3 mm 65 ...
