EuroLite 41700060, User Manual

Page: 27 / 36

00129135, Version 1.0 27/36
OPERATION
After you switch on the device with the ON/OFF switch, the device starts running. The display lights up and
you can choose the desired mode via the buttons MENU, ENTER, UP, DOWN.
The device has two operating modes. It can be operated in stand-alone mode via the control board and the
EUROLITE IR-35 remote control or in DMX-controlled mode via a standard DMX controller and QuickDMX
with suitable wireless transmitter.
Stand-alone mode
In the stand-alone mode, you can do without a controller. Disconnect the device from the controller, de-
activate QuickDMX and call the desired setting. Please refer to the instructions under
Control Board .
Master/Slave operation via QuickDMX
Set the master device and each slave device to the same transmission channel using the function
“WIRELESS” -“ID Set”, to change the transmission channel and pair the devices.
The selected transmission channel is indicated by the status indicator.
Channel Color
1 Red
2 Green
3 Blue
4 Yellow (red/green)
5 Cyan (green/blue)
6 Magenta (red/blue)
Choose the device which is to control the effects. This device then works as master device and controls all
other slave devices.
Set the master device to the master mode. Set the slave mode on every slave device. Please refer to the
instructions under
Control Board .