EuroLite 41600080 User Manual Download Page 11

 

00106260.DOCX, Version 1.1 

11/20

USER MANUAL 

 

 

 

ML-575 MSR Multi Lens Spot 

 

 

 

For your own safety, please read this user manual carefully before you initially start-up. 

 
Every person involved with the installation, operation and maintenance of this device has to 
- be qualified 
- follow the instructions of this manual 
- consider this manual to be part of the total product 
- keep this manual for the entire service life of the product 
- pass this manual on to every further owner or user of the product 
- download the latest version of the user manual from the Internet 
 

INTRODUCTION 

Thank you for having chosen a EUROLITE ML-575 MSR Multi Lens Spot. If you follow the instructions given 
in this manual, we are sure that you will enjoy this device for a long period of time. 
 
Unpack your ML-575 MSR Multi Lens Spot. 
 

SAFETY INSTRUCTIONS 

 

 

 
This  device  has  left  our  premises  in  absolutely  perfect  condition.  In  order  to  maintain  this  condition  and  to 
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning 
notes written in this user manual. 
 

Important: 

Damages caused by the disregard of this user manual are not subject to warranty. The dealer 
will not accept liability for any resulting defects or problems. 

 
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it 
on  immediately.  The  arising  condensation  water  might  damage  your  device.  Leave  the  device  switched  off 
until it has reached room temperature. 
 

CAUTION!

Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!

CAUTION!

Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!

 

Summary of Contents for 41600080





















Reviews: