10
Assembly
Quick installation guide_Conveyor system MB-flex Q N_20221114_EN.docx
Information
Data
Designation or value
Personnel
Maintenance personnel
Personal protective equipment
Protective work clothing
Protective gloves
Safety shoes
Tools, aids
Mitre cutter
Steel pin (Ø 4 mm x approx. 200 mm long)
Hammer
Plastic mallet
Carpet knife
Drill and drill bit Ø 3.4 mm
WARNING
Risk of injury and serious damage to property due to improper installation!
A lack of knowledge about the system and experience in assessing and averting residual risks
during proper assembly can result in injury and even death.
»
Before working on the system, turn it off and guard it from being switched back on.
»
Prior to working in the system area, empty or clear the system.
»
Regularly remove product residues and splitters from the entire system area.
»
Check that the screw connections on all load-bearing and moving parts are tightened correctly
»
Check correct function of bearings and links.
»
Check the function of the safety devices.
»
Wear appropriate personal protective gear in the system area.
Prerequisite:
▪
System is switched off and safeguarded against being restarted.
3.2
Assembly the chain guide profiles and slide profiles on the
modular belt conveyor
Observe the following during assembly:
▪
During assembly, align the butt joints of the components.
▪
Avoid steps between the butt joints.
1. Fit the chain guide profiles (1) onto the bottom of
the chassis profiles as shown.
2. Fit the slide profiles (2) onto the top of the holding
profiles.
Fig. 2: Assembly the chain guide profiles and slide profiles on the modular belt conveyor
1
2