manualshive.com logo in svg

EUROCOM Sky X6, User Manual

The EUROCOM Sky X6, a high-performance laptop, offers unparalleled gaming and multitasking capabilities. Unlock the full potential of this remarkable device with the comprehensive User Manual, available for free download at manualshive.com. Explore its features, master its functions, and unleash the power of the EUROCOM Sky X6.

Share
Download
background image

NVIDIA Video Driver Controls

Change Resolution C - 5

C

Change Resolution

You can 

Change Resolution

 for your attached displays from the NVIDIA control

panel.

1.

Attach your external display to the appropriate port, and turn it on.

2.

Go to 

NVIDIA Control Panel

 (see page 

C - 2

).

3.

Double-click 

Display

 (if the sub-menus are not visible)

, 

and then click

 Change

resolution

.

4.

Click to select the display, and then adjust the settings from “

2.Choose the

resolution.

” and “

3.Apply the following settings.

” 

5.

Click 

Apply 

to save the settings.

Figure C - 4

Change Resolution

Summary of Contents for Sky X6

































































































































































































































































































































Reviews:

No comments

Related manuals for Sky X6

Brands by name

Popular brands

Load more brands