EUROCOM Sky X6 User Manual Download Page 158

Page: 158 / 320

Modules

6 - 14 Setting Up SATA RAID or AHCI Mode

23. The RAID volume will then be created and the RAID information will be displayed

under

Intel(R) Rapid Storage Technology

(in the

Advanced

menu).

24. Press <Esc> to exit the menu.
25. Press <F4> and <Yes> to “

Save Changes and Reset

”, however

ensure that the

condition in the bulleted points below are met

before doing so.

• Make sure the

Windows 10

OS DVD is in the attached DVD drive, as the com-

puter starts up it will automatically boot from the

Windows 10

OS DVD (you

will be prompted to press a key to boot from the DVD).

• Make sure your USB Flash drive is attached to one of the computer’s USB ports.

26. Press <F7> as the computer starts up to bring up the boot device menu.

Figure 6 - 8

Created RAID

Information

(Advanced > Intel(R)

Rapid Storage

Technology)

Summary of Contents for Sky X6

































































































































































































































































































































Search results

Summary of Contents for Sky X6

Reviews:

Related manuals for Sky X6

Brands by name

Popular brands

EUROCOM Sky X6, User Manual

Search results

Summary of Contents for Sky X6

Reviews:

Related manuals for Sky X6

Brands by name

Popular brands